PTP Quality Training Ltd - Plant and Machinery Courses

Health and Safety Courses

Construction Plant & Machinery

Lifts and Cranes

Abrasive Wheels

Other Training Courses

Documentation, links and Manuals

Career Development Loan

Search

Construction Plant & Equipment Courses (including JCB type machinery)

Plant and machinery courses are carried out in small groups so that you receive plenty of individual attention, supplemented by course materials. We work closely with the Health and Safety Executive to ensure that our materials reflect current safe working practices.

All our land based training courses are approved by the Lantra Awards scheme and all our plant and machinery courses are approved for accreditation with CITB.

Who should attend:-

Novice Operators for Foundation Training; Experienced Workers for Refresher/Assessment

What is the course aim:-

A module credit will be awarded to the candidate for the successful completion of these modules. Instruction, training and/or assessment of mandatory modules MO1 and MO2 must be undertaken and the CITB Health & Safety Test must be successfully completed (after appropriate training) for the issue of the Specialised Plant and Machinery Operations Intermediate Certificate or the Lantra Certificate of Competence on successful completion, whichever is applicable.

Our Plant and Machinery courses include:-

CPCSA33 - Agricultural Tractor
CLVT47X - Compact Tractor Driving
CPCSA34 - Crawler Tractor/Dozer
CPCSA35 - Crawler Tractor/Side Boom
CPCSA36 - Lorry Loader
CPCSA37 - Trencher
CPCSA41 - Loader Compressor
CPCSA10 - 180° Excavator below 5 tonne
CPCSA10 - 180° Excavator above 5 tonne
CPCSA58 - 360° Excavator above 10 tonne
CPCSA59 - 360° Excavator above 10 tonne
CPCSA17 - Telescopic Handler
CPCSA09 - Forward Tipping Dumper
CPCSA56 - Dump Truck - Articulated Chassis A56
CPCSA57 - Dump Truck - Articulated Chassis A57
CPCSA31 - Ride On Roller
CPCSA24 - MEWP - Motorised Scraper
CPCSA25 - MEWP - Scissor
CPCSA26 - MEWP - Boom
CPCSA27 - MEWP - Mast Climber
CPCSA21 - Wheeled Loading Shovel
CPCSA44 - Truck Mounted Boom Concrete Pump
CPCSA45 - Piling Rig - Driven below 15 tonne
CPCSA46 - Piling Rig - Driven Above 15 tonne
CPCSA47 - Piling Rig - Bored below 15 tonne
CPCSA48 - Piling Rig - Bored Above 15 tonne
CPCSA30 - Piling Rig - Tripod
CPCSA39 - Skip Handler
CPCSA43 - Screener
CPCSA49 - Plant Loader/Securer (non STGO)
CPCSA40 - Slinger Signaler
Skid Steer Loaders
Rough Terrain Masted Lift Truck
Fork Lift Sideloader
Industrial Masted Lift Truck
Industrial Telescopic Lift Truck
ReachTruck

Top

CPCSA33 - Agricultural Tractor Training

Related Documents

Carriage of Passengers on Farm Trailers

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use start, running checks and close-down procedure
Preparing the tractor for site and road travel • Attaching trailed and mounted implements to the tractor
Travelling the tractor over different terrain including rough, undulating ground, with mounted and trailed implements
Travelling up and down substantial inclines, with and without mounted and trailed implements
Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements
Precautions and actions for underground and overhead services and other hazards
Operating PTO driven implements
Loading procedures
Placing the tractor in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration: Five days

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: A33

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

Compact Tractor Driving Training

Related Documents

Carriage of Passengers on Farm Trailers

Course Objectives

Identify the risks associated with this type of tractor/implement
Select appropriate PPE
Identify the controls and components
Understand the meaning of all instruments
Carry out daily checks as indicated in the operator's manual
Carry out pre-start checks
Attach a mounted implement and perform basic manoeuvres
Attach a power shaft (PTO) correctly
Understanding the legal requirements involving PTO guards
Attach and manoeuvre a trailed implement or trailer using the available hitch
Understand the legal requirements when travelling on the public road

Who are the course for?

All land based workers driving compact tractors as part of their daily routine

Duration / Format

1 Day

CPCSA34 - Crawler Tractor/Dozer Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use running checks and close-down procedure
Preparing the dozer for site travel
Travelling the dozer over differing types of terrain, including rough undulating ground and substantial inclines
Manoeuvring progressing to confined spaces in a forward and reverse direction
Precautions and actions for underground services and other hazards
How to form stockpiles by cutting below ground
How to cut, side-cast and spread materials using the blade at angles
Checking the integrity and security of the load
Spread and level stockpiles to given specifications
Placing the dozer in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA34

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery

CPCSA35 - Crawler Tractor/Side Boom Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use running checks and close-down procedure
Set side boom for site travel
Travel over different types of terrain, including rough undulating ground and corners, with and without a load
Manoeuvre in confined areas using forward and reverse direction
Set up side boom to pick up various loads
Lift and place loads at both minimum and maximum radius
Recognise and respond to given signals or instructions
Explain the reasons for moveable counterweight
Explain precautions to be taken for overhead services and other hazards
Keep within safe working parameters
Placing the machine in an out-of-service condition
Loading and unloading procedures on and off a transporter
Explain the rigging and de-rigging procedures
Trained operator achievement test

Duration: Novice - Five days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA35

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery

CPCSA36 - Lorry Loader Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks of vehicle and lifting appliance
Configure the lorry loader and carrier vehicle for site and road travel
Manoeuvre the carrier vehicle into position in order to carry out the lifting of various loads
Set up carrier vehicle to carry out lifts from minimum to maximum radius
Select, check and use correct lifting gear for the lifting of various loads
Lift and place loads at varying radii
Load a vehicle in accordance with industry practices
Secure various loads on the vehicle bed in accordance with industry practices
Explain precautions to be taken for underground and overhead services and other hazards
Keep within safe working parameters
Trained operator achievement test

Duration: Novice - Five days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA36 (a-hook, b-clamshell, c-clamp)

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery

CPCSA37 - Trencher Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Set the trencher for site travel
Travel over different types of terrain, including rough undulating ground
Travel up and down substantial inclines
Manoeuvre in confined areas using forward and reverse direction
Explain precautions to be taken for underground services and other hazards
How to cut trenches in different ground conditions, including maintaining depth of cut on undulating areas
Varying ground characteristics and how to deal with them
How to cut trenches up and down hill
Placing the trencher in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA37

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card CSCS Health & Safety Touch Screen Test

CPCSA42 - Crusher Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use running checks and close-down procedure
Set side boom for site travel
Travel over different types of terrain, including rough undulating ground and corners, with and without a load
Manoeuvre in confined areas using forward and reverse direction
Set up side boom to pick up various loads
Lift and place loads at both minimum and maximum radius
Recognise and respond to given signals or instructions
Explain the reasons for moveable counterweight
Explain precautions to be taken for overhead services and other hazards
Keep within safe working parameters
Placing the machine in an out-of-service condition
Loading and unloading procedures on and off a transporter
Explain the rigging and de-rigging procedures
Trained operator achievement test

Duration: Novice - Five days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA35

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery

CPCSA41 - Loader Compressor Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Set the vehicle for site and road travel
Travel over differing types of terrain, including rough, undulating ground, both in a loaded and unloaded state
Manoeuvre the vehicle in confined areas using forward and reverse direction, in a loaded and unloaded state
Explain precautions to be taken for overhead services and other hazards
Position and prepare machine for compressed air tool operation, taking into account environmental considerations
Ensure machine integrity and security when using compressor systems
Carry out compressed air operations
Recognise and respond to given signals or instructions
Loading and unloading procedures on and off a transporters
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA41

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card CSCS Health & Safety Touch Screen Test

Skid Steer Loaders Training

Course Objectives

Identify the basic construction and components, and the purpose and use of all controls and gauges.
Identify and comply with manufacturers instructions in accordance with the operator’s handbook, other information sources and applicable legislation.
Carry out all pre-use and running checks.
Set the skid steer for site and road travel.
Travel over differing types of terrain, including rough undulating ground, both in a loaded and unloaded state.
Travel up and down substantial inclines in a loaded and unloaded state.
Manoeuvre in confined areas using forward and reverse direction, in a loaded and unloaded state.
Form stockpiles and ramps of various materials.
Load various types of materials into receptacles, i.e. vehicles, hoppers, skips etc.
Clean and level different types of materials.
Place the skid steer in an out-of-service condition.
Explain the loading and unloading procedures on and off a transporter.

Who are the courses for?

Anyone who uses or will be using a skid steer shovel in the land-based industries or construction industry.

Duration / Format

Novice operators – 3 days
Experienced operators – varying depending on experience

Instructor / Machine / Trainee Ratio

1 instructor : 2 machines : 4 trainees or
1 instructor : 1 machine : 2 trainees

Equipment Required for CPCS Course and Test

Serviceable skid steer that meets current legislation, fitted with a general purpose excavating bucket.
A vehicle for loading into, which must have a capacity at least equivalent to 4 full bucket loads of the loader being used for the test.

NB trainees cannot be trained/assessed for operating the loading vehicle during the skid steer loader course

A bank or mound of material which can be excavated.
An area of ground, minimum area half hectare (1 acre), clear of hazards which must include:
- uneven, rough terrain.
- a slope(s) not less than 18% (1:5.5) incline having sufficient manoeuvring room at the top and bottom.
- a straight run of at least 10 metres in length
NB Written permission from the employer/landowner must be provided stating that the training area is able to be used for the purposes intended and is free from all underground services.

Suitable material for marking out eg sand, lime or marker spray
Cones/Barriers to set up an exclusion zone and create restrictions for manoeuvring.
Operator instruction book for all machinery and attachments
First Aid equipment complying with the Health and Safety (First Aid) Reg 1981

CPCSAA40 - Slinger / Signaller Training

Course Objectives

Identification marks, test certification and thorough examination of documents
Identifying load weights and centres of gravity
Characteristics of lifting accessories including effects of angles and attaching methods
Selection of lifting accessories including uniform load method
Following method statements and other instructions, including preparation of work area
How to sling various loads including balanced, unbalanced and loose
How to deliver signals to the lifting appliance operator using different forms of communication
How to lift and accurately place various loads including test lifts, to and from confined and “blind” areas
Precautions and actions for overhead services and other hazards
How to keep within safe working parameters • Storage of lifting accessories
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA40

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery

180° Excavator A10 - below 5 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use, start, running checks and close-down procedure
Preparing the excavator for site and road travel
Travelling the excavator over differing types of terrain, including rough, undulating ground and up and down substantial inclines
Manoeuvring, progressing to confined spaces in a forward and reverse direction
Positioning and setting the machine to excavate
Precausions and actions for underground and overhead services and other hazards
Soil and material characteristics • Excavating below ground lever
Loading vehicles and hoppers
Backfilling, grading, spreading and levelling different types of terrain
How to remove and re-attach two different buckets
Placing the excavator in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration:

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference:

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

180° Excavator A12 - above 5 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use, start, running checks and close-down procedure
Preparing the excavator for site and road travel
Travelling the excavator over differing types of terrain, including rough, undulating ground and up and down substantial inclines
Manoeuvring, progressing to confined spaces in a forward and reverse direction
Positioning and setting the machine to excavate
Precausions and actions for underground and overhead services and other hazards
Soil and material characteristics • Excavating below ground lever
Loading vehicles and hoppers
Backfilling, grading, spreading and levelling different types of terrain
How to remove and re-attach two different buckets
Placing the excavator in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration:

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference:

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

360° Excavator A58 - below 10 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use, start, running checks and close-down procedure
Preparing the excavator for site and road travel
Travelling the excavator over differing types of terrain, including rough, undulating ground and up and down substantial inclines
Manoeuvring, progressing to confined spaces in a forward and reverse direction
Positioning and setting the machine to excavate
Precausions and actions for underground and overhead services and other hazards
Soil and material characteristics • Excavating below ground lever
Loading vehicles and hoppers
Backfilling, grading, spreading and levelling different types of terrain
How to remove and re-attach two different buckets
Placing the excavator in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration:

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference:

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

360° Excavator - above 10 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use, start, running checks and close-down procedure
Preparing the excavator for site and road travel
Travelling the excavator over differing types of terrain, including rough, undulating ground and up and down substantial inclines
Manoeuvring, progressing to confined spaces in a forward and reverse direction
Positioning and setting the machine to excavate
Precausions and actions for underground and overhead services and other hazards
Soil and material characteristics • Excavating below ground lever
Loading vehicles and hoppers
Backfilling, grading, spreading and levelling different types of terrain
How to remove and re-attach two different buckets
Placing the excavator in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration:

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference:

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

Rough Terrain Masted Lift Truck Training

Course Objectives

The essential features of lift trucks and their maintenance
How to avoid potential dangers of lift truck operation
How to assess loads and move them safely
How to get the best from your lift truck in different conditions
The relevant legal requirements
Stability
Load centres; rating and derating
Positioning, turning and straightening
Rear end swing
Use of controls, instruments
Ramps & hills
General safety

Duration:

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference:

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery

Fork Lift Sideloader Training

We can offer recognised foundation or refresher courses for masted or telescopic rough-terrain forklifts.

Industrial Masted Lift Truck Training

Course Objectives:-

The essential features of lift trucks and their maintenance
How to avoid potential dangers of lift truck operation
How to assess loads and move them safely
How to get the best from your lift truck in different conditions
The relevant legal requirements
Stability
Load centres; rating and derating
Positioning, turning and straightening
Rear end swing
Use of controls, instruments
Ramps & hills
General safety

Duration:

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference:

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery

CPCSA17 - Telescopic Handler Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Operator documentation, certificates, method statements, lift plans, duties, charts etc
Pre-use and running checks, close-down procedure
Preparing the tele-handler for site and road travel
Travelling the tele-handler over different terrain including rough undulating ground (not industrial telescopic) and substantial inclines while unloaded and loaded
Manoeuvring progressing to confined spaces in a forward and reverse direction with and without loads
Setting the tele-handler to lift and move different loads
Load characteristics, integrity and security while picking, moving and landing, including landing loads in high places
Lifting, moving and placing various loads accurately including loading and unloading a vehicle or trailer
Precautions and actions for overhead services and other hazards
How to stay within safe working parameters
Placing the tele-handler in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration: Novice - Five days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA17

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

CPCSA09 - Forward Tipping Dumper Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges. • Use of the operator’s handbook, etc
Pre-use, start, running checks and close-down procedure
Preparing the dumper for site and road travel
Travelling the dumper over different terrain including rough, undulating ground while unloaded and loaded
Travelling up and down substantial inclines in a loaded and unloaded state
Manoeuvring progressing to confined spaces in a forward and reverse direction
Positioning the dumper to receive loads
Loading procedures • Load characteristics, integrity and security
Discharging loads into trenches and over edges
Placing the dumper in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration: Novice - Three days; Experienced - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA09

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

CPCSA56 - Dump Truck - Articulated Chassis CPCS A56 Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Set the vehicle for site and road travel
Travel over differing types of terrain, including rough, undulating ground, both in a loaded and unloaded state
Manoeuvre the vehicle in confined areas using forward and reverse direction, in a loaded and unloaded state
Explain precautions to be taken for overhead services and other hazards
Position the dump truck to receive loads
Comply with loading procedures, loading entegrity and security
Discharge loads into trenches or over edges
Place the dump truck in an out-of-service condition
Loading and unloading procedures on and off a transporters
Trained operator achievement test

Duration: Novice - Five days; Experienced (2 years or more of driving) - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA56

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card CSCS Health & Safety Touch Screen Test

CPCSA57 - Dump Truck - Articulated Chassis CPCS A57 Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Set the vehicle for site and road travel
Travel over differing types of terrain, including rough, undulating ground, both in a loaded and unloaded state
Manoeuvre the vehicle in confined areas using forward and reverse direction, in a loaded and unloaded state
Explain precautions to be taken for overhead services and other hazards
Position the dump truck to receive loads
Comply with loading procedures, loading entegrity and security
Discharge loads into trenches or over edges
Place the dump truck in an out-of-service condition
Loading and unloading procedures on and off a transporters
Trained operator achievement test

Duration: Novice - Five days; Experienced (2 years or more of driving) - One day assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA09

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card CSCS Health & Safety Touch Screen Test

CPCSA31 - Ride on Rollers Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use, start, running checks and close-down procedure
Preparing the roller for site and road travel
Travelling the roller over differing types of terrain, including undulating ground
Manoeuvring, progressing to confined spaces in a forward and reverse direction and identification of conditions that will make the roller unstable
How to ser the roller for compaction duties, including preparing an area prior to compaction, markings, barriers, signs and traffic management
Characteristics of materials and how to compact them, including recognising compacted and uncompacted areas
How to safely compact up to supported and unsupported edges, around radii and obstructions and on inclines
Placing the roller in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration:

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA31

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must undertake this

CPCSA24 - Motorized Scraper Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use running checks and close-down procedure
Hazards
Preparing the scraper for site travel
Travelling the scraper over different terrain, including rough, undulating ground
Travelling up and down substantial inclines, loaded and unloaded
Manoeuvring progressing to confined spaces in a forward and reverse direction, loaded and unloaded
Precautions and actions for underground services and other hazards
Positioning the scraper for push loading
How to load the bowl to capacity and discharge loads to form a stockpile
How to grade, spread and level including soil and material characteristics
Placing the scraper in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced (2-years or more) - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA24

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • Red Plant Operator Card Holders must do 300 hours per category, and undertake NVQ Level 2 in Plant & Machinery within 12 months to gain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA25 - MEWP - Scissor Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Explain all displayed information on the machine
Carry out emergency lowering procedures
Operate controls from ground level, and from within the working platform
Manoeuvre the MEWP involving tight turns and limited access, using both forward and reverse motions
Position the platform up to maximum working height
Explain precautions to be taken for overhead services and other hazards
Keep within safe working parameters
Place the machine in an out-of-service condition
Explain the loading and unloading procedures on and off a transporters
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA72

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card

CPCSA26 - MEWP - Boom Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Explain all displayed information on the machine
Carry out emergency lowering procedures
Operate controls from ground level, and from within the working platform
Manoeuvre the MEWP involving tight turns and limited access, using both forward and reverse motions
Position the platform up to maximum working height
Explain precautions to be taken for overhead services and other hazards
Keep within safe working parameters
Place the machine in an out-of-service condition
Explain the loading and unloading procedures on and off a transporters
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA26

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card

CPCSA27 - MEWP - Mast Climber Training

Course Objectives:-

Identify the basic construction and components, and the purpose and use of all controls and gauges.
Identify and comply with manufacturers instructions in accordance with the operator’s handbook, other information sources i.e. duties charts, and applicable legislation.
Explain all relevant documentation.
Explain all displayed information on the machine.
Carry out pre-start and running checks.
Carry out emergency lowering procedures.
Operate controls from ground level, and from within the working platform.
Manoeuvre/travel the MEWP involving tight turns and limited access, using both forward and reverse motions.
Travel the MEWP with the platform in a raised position (self-propelled only)
Position the platform up to maximum working height.
Keep within safe working parameters.
Place the machine in an out-of-service condition.
Explain the loading and unloading procedures on and off a transporter

Duration: Novice - Four days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA27

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card

CPCSA21 - Wheeled Loading Shovel Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use, start, running checks and close-down procedure
Preparing the excavator for site and road travel
Travelling the excavator over differing types of terrain, including rough, undulating ground and up and down substantial inclines
Manoeuvring, progressing to confined spaces in a forward and reverse direction
Positioning and setting the machine to excavate
Precautions and actions for underground and overhead services and other hazards
Soil and material characteristics
Excavating below ground lever
Loading vehicles and hoppers
Backfilling, grading, spreading and levelling different types of terrain
How to remove and re-attach different buckets
Placing the excavator in an out-of-service condition
Loading and unloading procedures on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA21

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card

CPCSA44 - Truck Mounted Boom Concrete Pump Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Set the vehicle for site and road travel
Position the pump to receive concrete
Apply anchorages to pipes
Ensure that the mix is suitable for pumping
Agree code of signals with other applicable site operatives
Recognise and respond to given signals or instructions
Guide and locate the loading vehicle/mixer
Pump concrete to the required destination
Identify and clear blockages as they occur
Explain precautions to be taken for overhead services and other hazards
Keep within safe working parameters
Carry out end-of-service cleaning procedures
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA44

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA45 - Piling Rig - Driven below 15 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Manoeuvre the rig to the piling position
Explain precautions to be taken for underground services and other hazards
Set up the rig for driven works
Recognise and respond to given signals or instructions
Operate the rig to install and complete driven works to line and level
Place the machine in and-out-of service condition
Explain de-rigging procedures
Explain preparation procedures when loading and unloading on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA45

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA46 - Piling Rig - Driven above 15 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Manoeuvre the rig to the piling position
Explain precautions to be taken for underground services and other hazards
Set up the rig for driven works
Recognise and respond to given signals or instructions
Operate the rig to install and complete driven works to line and level
Place the machine in and-out-of service condition
Explain de-rigging procedures
Explain preparation procedures when loading and unloading on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA46

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA47 - Piling Rig - Bored below 15 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Manoeuvre the rig to the piling position
Explain precautions to be taken for underground services and other hazards
Set up the rig for driven works
Recognise and respond to given signals or instructions
Operate the rig to install and complete driven works to line and level
Place the machine in and-out-of service condition
Explain de-rigging procedures
Explain preparation procedures when loading and unloading on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA47

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA48 - Piling Rig - Bored above 15 tonne Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Manoeuvre the rig to the piling position
Explain precautions to be taken for underground services and other hazards
Set up the rig for driven works
Recognise and respond to given signals or instructions
Operate the rig to install and complete driven works to line and level
Place the machine in and-out-of service condition
Explain de-rigging procedures
Explain preparation procedures when loading and unloading on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA48

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA30 - Piling Rig - Tripod Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Manoeuvre the rig to the piling position
Explain precautions to be taken for underground services and other hazards
Set up the rig for driven works
Recognise and respond to given signals or instructions
Operate the rig to install and complete driven works to line and level
Place the machine in and-out-of service condition
Explain de-rigging procedures
Explain preparation procedures when loading and unloading on and off a transporter
Trained operator achievement test

Duration: Novice - Ten days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA30

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA49 - Plant Loader/Securer (non STGO) Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Prepare an area for the purposes of loading and unloading construction plant
Prepare a transporter for receiving different items of construction plant, which must include tracked, wheeled and roller types
Agree and give appropriate signals to the plant operator
Load or guide items of plant onto a transporters
Position items of plant on transporter to ensure no overloading of transporter axles
Ensure integrity and security of items of plant plus attachments
Prepare a transporter for road travel
Ensure intended route of travel is compatible with load weight, width and height
Explain the specific requirements of current legislation for equipment designed for transporting construction plant
State the requirements to be undertaken when loading and unloading plant on the public highway
Explain precautions to be taken for overhead services and other hazards
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA49

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA43 - Screener Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Set the machine for work
Operate the screener to produce stockpiles
Place the machine in an out-of-service condition
Explain the de-rigging and preparation for transportation procedure (applicable to mobile units only)
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA43

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators must complete 300 hours per module and complete the NVQ within 12 months to obtain the Blue Competence Card • CSCS Health & Safety Touch Screen Test

CPCSA39 - Skip Handler Training

Course Objectives:-

Basic construction, names of components and the purpose and use of all controls and gauges
Use of the operator’s handbook, etc
Pre-use and running checks
Set the vehicle for site and road travel
Travel over differing types of terrain, including rough, undulating ground, both in a loaded and unloaded state
Manoeuvre the vehicle in confined areas using forward and reverse direction, in a loaded and unloaded state
Explain precautions to be taken for overhead services and other hazards
Position the vehicle to pick up and place skip/containers, including areas having height restrictions
Pick up and place skips/containers of various sizes and weights
Discharge a loaded skip/container
Ensure load integrity and security including by sheeting/netting or other appropriate securing
Loading and unloading procedures on and off a transporters
Trained operator achievement test

Duration: Novice - Four days; Experienced - One day worker assessment

Max Number of People:

Venue: You must have your own machine or have access to hire and carry out training on your own grounds / or PTP to hire for our own site

Cost: Upon Application

Course Reference: CPCSA39

Optional Follow-up courses: Manual Handling • First Aid • Other Plant & Machinery • NVQ Level 2 in Plant & Machinery – Red Card Operators